Floor Mold Removal in Los Angeles

Mold on a floor usually means water has been sitting there — a leak, a spill that was never dried, flooding, or damp rising from below. Growth can spread across the surface, under the flooring, and into the subfloor beneath. Our team removes floor mold across Los Angeles, from wood and laminate to tile and the subfloor underneath.

Call us at (945) 422-7665 or request a free estimate and we will inspect the floor, trace the water, and remove the growth.

How floor mold starts

The most common causes are plumbing leaks that drip onto the floor, appliance leaks from dishwashers and washing machines, flooding, and spills that soak into wood or laminate and are never fully dried. In ground-floor rooms, damp can also rise from the slab or crawl space below. Once water gets under flooring, it stays there — and mold follows.

Signs of floor mold include dark staining along baseboards, a musty smell near the floor, warped or cupped wood boards, soft spots underfoot, and visible growth at the edges of the room. Our team takes moisture readings in the flooring and subfloor to map how far the damp has spread.

• Plumbing and appliance leaks dripping onto the floor
• Flooding and spills that were never fully dried
• Damp rising from a slab or crawl space below
• Water trapped under wood, laminate or tile
• Leaks from bathrooms and kitchens spreading under floors

How we remove floor mold

We inspect and take moisture readings first, so we know how much flooring has to come up. Then we contain the area, remove the affected flooring and padding, clean the subfloor where it can be saved, and remove subfloor sections that cannot be cleaned. The structure is dried and moisture readings are checked before any new flooring goes down.

Wood floors that have only surface growth can sometimes be cleaned and refinished; wood that has been soaked and colonized usually has to be removed. Laminate and carpet padding that have been wet and moldy are removed rather than cleaned. We explain the choice for your floor before work begins.

After the floor is clean

A new floor laid onto a wet subfloor will grow mold again, so drying comes before rebuilding. We check moisture readings in the subfloor before flooring work starts, and we explain the water source — a leak, flooding, or damp from below — so it can be fixed.

If the floor mold followed a flood or major leak, our mold removal after water damage page covers the wider job. For growth in the crawl space below the floor, see our crawl space mold removal service.

Related pages

Our 5-step mold removal process

1. Inspection. We inspect the affected area, look for visible growth and moisture sources, and map how far the problem has spread.
2. Testing & lab findings. Where needed, we sample air and surfaces. Lab findings tell us what type of mold is growing and how much of it there is.
3. Remediation plan. We explain what we found, what needs to be removed, and what it will take to fix the moisture source — before any work begins.
4. Removal & remediation. We contain the work area, remove the mold growth and affected materials, clean the surfaces, and dry the space.
5. Follow-up & clearance testing. We return to check the work, re-test where needed, and confirm the area is dry and clear before we call the job done.